MODEL 436

PANHANS THICKNESS PLANER TYPE 436 with TERSA CUTTERHEAD
Working width 630mm (24.8")
Max. planing thickness 250mm (9.85")
Max. depth of cut 8mm
Length of table 1110mm (43")
Speed of cutter head 5000 RPM
Diameter of cutter head 125mm
Tersa cutterblock with 4 throw away cutters usable on both sides.
2 Feed speeds 7 and 14 m/min.
Sectional pressure bar
Electrical height adjustment of thickness table with push button for fast and slow up and down. LED height indication in Inch or MM.
Extreme low noise level
Swing-up cover with integrated dust extractor duct - 160mm. (Including electrically operated safety device which turns off head & turns on brake for fast stopping)
Thickness table in cast ribbed construction with 4 spindles for raising and lowering.
Electrical Equipment: Push button starters, motor protection and 110V control circuit.
* Motor 12 HP, 220 volt, 3 phase, 60HZ. with motor brake for fast stopping.
Net weight 1600 lbs. Conforms to CE regulations
Noise level in idle running dB 65.9
Noise level in operation dB 81